Fix Toro® Super (*Old 51552 - 51592) Toro® Ultra(51599 - 51619) Carbon Brush Set

Description

Fix Toro® Super (*Old 51552 - 51592) through Toro® Ultra (51599 - 51619) New Carbon Brush Set
Bring your Toro back to life!
Replacing brushes
and cleaning commutator
early can prevent damage to motor armature.
Product Application
·
Electric motor brush can be used as a replacement for many power tools with 6mm brush see (Dimensions below)
·
To use; remove old brush, Cut copper wire close to old brush, 'Tin' wire lead end and solder, Seat Brushes as shown, Clean armature as needed, re-assemble, and
run blower to seat brushes.
·
This brush is compatible with;
NOT FOR 7 AMP Toro. For  Toro®
7-Amp leaf blower
Toro® model 51586 Toro® 7-amp blower. (SEE link below:)
https://www.ebay.com/itm/232545925909
*NOT FOR Toro "850"
model
1990's Toro 850 Blower 51575, 51576, 51577, 51578
(Please see
Toro 850 Super Blower Shredder-Vac 12 Amp Replacement Motor Carbon Brush Set
)
*NOT FOR Toro "51585
"
model
1990's Toro Blower
Not for Toro Ultra 51594
Blower 10.5-AMP
- please see
https://www.ebay.com/itm/232549833390
If No
t Sure
: PLEASE CHECK YOUR BLOWER BRUSH SIZE FIRST!
Replacement carbon brushes are
NOT AVAILABLE
from Toro®
·
F
ix it yourself, eliminating waste, and unnecessary expense.
☛
·
Buy two sets now with discounted shipping,
the right size brush is hard to find and
you'll have them for next time
Description
·
Carbon motor brushes
·
Most commonly replaced power tool components
·
Replacing brushes early can prevent damage to motor armature
·
Often the cause of a poorly running motor
·
Replacing brushes can fix an intermittent motor
Product Specification
·
Product Name : Carbon Brush
·
Fitness of use : Generic Electric Motor
·
Carbon Brush Size (Approx): 6.2 x 6.3 x 19mm (L*W*H)
·
Copper Wire Length (Approx) : 23mm
·
Material : Carbon Graphite
·
Tinned : Solder
·
Color : As Picture Shown
·
Net Weight : 2g (each)
·
Package Content : 2 x Carbon Brush
Specification:
Product Name
Motor Carbon
Fitness
Generic Electric Motor
Carbon Brush Size (Approx)
6.2 x 6.3 x 19mm
(*L*W*H)
Copper Wire Length(Approx)
23mm (When Straight)
Material
Carbon Graphite
Weight
2g (each)
Package Content
2 x Motor Carbon Brush
1) Warning! - Remove Power, turn-off, and disconnect power before changing brushes.
2) Warning! - For safety always follow manufactures safety and operational instructions.
* Please return a positive review for good service, Thank You.
© 2015-2021 Draco Products. All Rights Reserved
Toro® and Vac®  are registered Trademark of The Toro Company. Draco Products is not affiliated
with The Toro Company.